Description In addition, different in-line monitoring methods, specifically plasma sensors and infrared cameras will be implemented.
Organisation DEUTSCHE GESELLSCHAFT FUR MATERIALKUNDE
Organisation country France
 Presentation on Surface Engineering webinar series by surface ventures, title “How to enhance the functionalities of surfaces using laser-based manufacturing Result title Presentation on Surface Engineering webinar series by surface ventures, title “How to enhance the functionalities of surfaces using laser-based manufacturing Result description CLASCO's introduction to surface engineering industrial and scientific audience, speaker Prof. Andrés Lasagni Result comments CLASCO online (EU) Result acronym Presentation on Surface Engineering webinar series by surface ventures
 Presentation on Surface Engineering webinar series by surface ventures, title “Introduction to laser based surface functionalization: present and perspectives” Result comments CLASCO online (EU) Result acronym Presentation on Surface Engineering webinar series by surface ventures

Description An adaptive training programme for digital upskilling will be implemented over the entire project to prepare the workforce for the I5.0 transformation and fully exploit the potential of the technologies
Organisation Karlsruhe Institute of Technology
 Automation of products' sorting and distribution for olives provider Result description the defective packages, storing the packages in the pallet.
 Automation of outbound facility in pharmaceutical sector Result comments ONE4ALL Czechia Hostivice

Description This will be achieved by applying in-line process monitoring, control and artificial intelligence strategies, and implemented in four different pilot plants in four different countries.
Organisation FUNDACIO INSTITUT DE RECERCA DE L'ENERGIA DE CATALUNYA
Organisation country France
 Customizable CIGS flexible solar foil (Roll-to- Roll), PV manufacturing line Result title Customizable CIGS flexible solar foil (Roll-to- Roll), PV manufacturing line
 EU Industry Days 2023 Result description integration of Ukraine into the single market and reinforcement of the EU defence industry capacity Our partner R2M Solution was present at the EU projects exhibition zone of the event

Description MODAPTO will be implemented in 3 industrial UCs involving 4 manufacturers at 3 different levels to showcase its versatility and applicability.
Organisation UNIVERSITE DE LORRAINE (UL)
Organisation country France

Description ; it is an essential tool, to be developed and implemented in companies.
Organisation Consorzio SPRING Strategic Partnership for Research based Innovative and Networked Growth
 AGILE Project - video Result title AGILE Project - video Result description The video presents the AGILE project on manufacturing for product competitiveness and innovation. Result comments AGILE Italy Padova Result acronym Agile-video

Description Implemented in the IVLab structure, the DIH4CPS Network will leverage and sustain its impact far beyond the project duration, creating a vibrant, overarching and cross sector one-stop-shop for collaboration
Organisation UNIVERSITE DE LORRAINE (UL)
Organisation country France
Comments project_id_EC super_admin project_rcn_EC super_admin topic_EC super_admin DT-ICT-01-2019 call_EC super_admin H2020-DT-2019-1 Innovation Action (IA) Project type - instrument
 D4.1a: Safe and Sustainable Aquaculture Farming Prototype Result title D4.1a: Safe and Sustainable Aquaculture Farming Prototype Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.11a: A capacity planning solution to optimize workflow to a changing production environment Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.2a: IoT/CPS for patient services upgrading in Home Healthcare Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.5a: 3D Audio-visual inmersive installation prototype Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.7a: CPS for security and wellbeing of shop floor workers Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.8a: Track and trace scheduled product in an open and hostile environment by deploying CPS Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.9a: Smart and sustainable mobility prototype Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.4a: CPS for energy Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.3a: CPS for personalised interactive Tourist Platform Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.10a: The urban orchard planter prototype Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package
 D4.6a: Food Processing Prototype Result description which will document the final prototype and lessons learned The structure of the deliverables will be streamlined for the whole work package

Description High Pressure Die Casting (HPDC) of light alloys and Plastic Injection Molding (PIM) are two of the most representative large-scale production-line in manufacturing field, which are strategic for the EU-industry
Organisation MAGMA GIESSEREITECHNOLOGIE GMBH
Organisation country France
Comments The KPIs of the OEE are immediately elaborated monitoring the time of each stage in the cycle and predicting the defects by implemented cognitive model.
 The MUSIC guide to key-parameters in High Pressure Die Casting Result title The MUSIC guide to key-parameters in High Pressure Die Casting Result comments MUSIC MUSIC PUBLIC TRAINING in Lazise on, October 27th, Result acronym MUSIC guide
 New Total Thermal Vision System Result description The result of this innovation is the second Infra red Sensor in the already existing system (before made by only one sensor), able to detect both dies (fixed and mobile).
 Data acquisition/monitoring/analysis (SCADA) implemented but isolated Taxon title Data acquisition/monitoring/analysis (SCADA) implemented but isolated
 RP 1.6 Material efficient Manufacturing processes Taxon description The latter can exploit the use of novel, new or regenerative (i.e.
 R&I Objective 1.4: Artificial intelligence for productive, excellent, robust and agile manufacturing chains - Predictive manufacturing capabilities & logistics of the future Comments The KPIs of the OEE are immediately elaborated monitoring the time of each stage in the cycle and predicting the defects by implemented cognitive model.

Description the production equipment and quality control in the whole production chain.
Organisation LAYERWISE NV
Comments Novel materials Manufacturing future products Manufacturing the products of the future Complex structures, geometries and scale Manufacturing future products Manufacturing the products of the future
 CT Metrology machine with Nanofocus source Result title CT Metrology machine with Nanofocus source Result description New calibration phantom and multi-material CT reconstruction engine implemented in a new CT metrology machine for micro-parts metrology
 Novel cannula for ophthalmic operation Result comments HI-MICRO Kleve
 RP 1.7 High Volume Manufacturing at the micro- and nano-scale Taxon title RP 1.7 High Volume Manufacturing at the micro- and nano-scale

Description algorithms to regulate the manipulation of the parts Fenceless human robot supervision system to adjust the speed of the robots upon the detection of humans and automatically re-plan robot trajectory
Organisation SIEMENS INDUSTRY SOFTWARE LTD
Organisation country Greece
Comments Dual arm robot platform & mechatronics Number of generated spin-offs or start-ups Additional KPIs These result are being implemented as module of a commercial solution.
 Dual arm for assembly of a vehicle Hydraulic pump Result title Dual arm for assembly of a vehicle Hydraulic pump
 Dual arm robot library Result description CURL++ - universal robot programming language developed in C++ and implemented as a ROS package, together with a MOCK program compiling and testing environment.
 Fenceless supervision system Result comments X-ACT Patras/Greece and Eibar/Spain
 Intuitive HMI Result acronym Intuitive HMI
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 Occupational safety and health Taxon description with the safety, health, and welfare of people at work.

Description EASE-R3 focuses on the selection of the best maintenance strategy, including decommissioning, such as renovation, repair, re-use, according to the minimization of Life Cycle Cost (LCC) and Life Cycle Assessment
Organisation RHEINISCH-WESTFAELISCHE TECHNISCHE HOCHSCHULE AACHEN - WZL
Organisation country France
Comments The End OF Life (EOL) decision support requires the maintenance history of a machine tool .
 AUGMENTED REALITY-based maintenance tool and of the remote assistance platform Result title AUGMENTED REALITY-based maintenance tool and of the remote assistance platform Result comments EASE-R3
 Validation of residual useful life (RUL) prediction of components/machines based on CNC control internal signal processing Result description The developed algorithms will be implemented on the Machine Controls and the needed Sensors for the RUL Prediction will be installed on the machines. Result comments EASE-R3
 Validation of Life Cycle Cost (LCC) analysis integrated with Reliability and Maintainability (R&M) simulation and Repair Decision Support System RDSS Result comments EASE-R3
 Validation of Life Cycle Cost (LCC) analysis integrated with Life Cycle Assessment (LCA) and Decommissioning Decision Support System - DDSS Result comments EASE-R3
 Validation of re-usability of components and Renovation approach based on multifunctional add-on modules Result comments EASE-R3
 Validation of VR based Re-Manufacturing Result comments EASE-R3
 Integrated framework for a cost-effective and EASE of Repair, Renovation and Re-use of machine tools within modern factory Result comments EASE-R3 Result acronym EASE-R3
 Periodic Report Summary 1 - EASE-R3 (Integrated framework for a cost-effective and ease of Repair, Renovation and Re-use of machine tools within modern factory) Result comments EASE-R3 Result acronym EASE-R3
 Innovative re-use of equipment Taxon title Innovative re-use of equipment
 IoT - Internet of Things Comments The End OF Life (EOL) decision support requires the maintenance history of a machine tool .

Description The project will be to reducing the cost of mass production of diagnosis and therapeutic micro devices which have a common problematic: medium sized batches, customization needs, micron-scale geometrical
Organisation SERVIZO GALEGO DE SAUDE
Comments But the concept of cost-effective, flexible and reconfigurable tool will be implemented through Additive Manufacturing.
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 RP 1.2 Advanced joining technologies for advanced and multi-materials Taxon description In order to be competitive in the future, these novel joining technologies should be implemented with a high degree of automation and quality control.
 Additive manufacturing Comments But the concept of cost-effective, flexible and reconfigurable tool will be implemented through Additive Manufacturing.

Description These services are provided by the equipment suppliers to the OEMs and component suppliers, whereas remanufacturing services are provided by the OEM and component supplier in the aftermarket.
Organisation OFFICINE MECCANICHE AERONAUTICHE SPA
Comments Manufacturing the products of the future Manufacturing future products Customised products Manufacturing future products Manufacturing the products of the future Resource efficient, sustainable products
 Production System Opportunistic Maintenance Planning Result title Production System Opportunistic Maintenance Planning
 Simulation and Navigation Cockpit Result description The integrated decision making tools are to be implemented into an integrated “Simulation and Navigation Cockpit”.
 Reconfigurable manufacturing systems Result comments ROBUSTPLANET Enschede
 Innovative re-use of equipment Taxon title Innovative re-use of equipment

Description To keep pace with the needs of the manufacturing industry of the future, in Manufacturing 4.0 companies need to flexibly react to these demands and be able to offer production capacities in a rapid way
Organisation TIE MAMBOFIVE BV
Comments future products Manufacturing the products of the future Resource efficient, sustainable products Manufacturing future products Manufacturing the products of the future Economic sustainability Manufacturing
 Automotive Use Case Result title Automotive Use Case
 D3.3: Technical Specification Result description This deliverable presents the Technical Specification of all CREMA software components precisely defining what needs to be implemented and how functionalities are achieved Furthermore technical interfaces
 Innovative re-use of equipment Taxon title Innovative re-use of equipment
 RP 1.2 Advanced joining technologies for advanced and multi-materials Taxon description In order to be competitive in the future, these novel joining technologies should be implemented with a high degree of automation and quality control.

Description The e-CUSTOM project aims to overcome the challenges faced by European manufacturers by developing innovative approaches, making possible to prepare unique product designs, manufacture these products and
Organisation Karlsruhe Institute of Technology
Organisation country France
Comments Moreover, the developed platform was design and implemented in close collaboration with the experts from the side of the end-users in order to ensure industrial applicability.
 Quantitative environmental impact analysis to be integrated in the production control systems. Result title Quantitative environmental impact analysis to be integrated in the production control systems. Result comments e-CUSTOM
 Environmental Assessment Module (EAM) Result description To be analysed the convenience of additional methodologies to be implemented. Competitive advantage Innovative seamlessly connectivity with a 3rd party tool (SIMAPRO), designed for specialist. Result comments e-CUSTOM
 Virtual and augmented reality modules Result comments e-CUSTOM
 User Adaptive Design System Result comments e-CUSTOM
 Decentralised Manufacturing Platform Result comments e-CUSTOM
 Customer co-design software platform Result comments e-CUSTOM
 Data framework for inter collaboration Result comments e-CUSTOM
 Data management for a seamless and robust data availability Result comments e-CUSTOM
 Collaboration-ready user interfaces Result comments e-CUSTOM
 Dynamic Network Module Result comments e-CUSTOM
 Formal and ontology-based modules Result comments e-CUSTOM
 Exploitation of e-CUSTOM platform on the French market Result comments e-CUSTOM
 Material and Process Environmental Ontology Result comments e-CUSTOM
 Web-based BoM generator for mass customised products Result comments e-CUSTOM
 Order Manager System Result comments e-CUSTOM
 Foot Scanning Result comments e-CUSTOM
 Retail Orthotic scan management Result comments e-CUSTOM
 Final Report Summary - E-CUSTOM (A Web-based Collaboration System for Mass Customization) Result comments e-CUSTOM Result acronym e-CUSTOM-140828
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 RP 1.12 Novel supply chain approaches for innovative products Taxon description of the End-Of-Life phase .
 UPSCALE - Compatibility and integration with existing production environment and value chains Comments Moreover, the developed platform was design and implemented in close collaboration with the experts from the side of the end-users in order to ensure industrial applicability.

Description The integration of sensor data allows for products to be members of the collaboration space.
Organisation INNOVATION SERVICE NETWORK PODJETNISKO IN POSLOVNO SVETOVANJE DOO
Organisation country France
Comments Manufacturing the products of the future Manufacturing future products Customised products Manufacturing future products Manufacturing the products of the future -customer integration into production
 Collaborative mobile maintenance to accelerate on-site error detection Result title Collaborative mobile maintenance to accelerate on-site error detection Result comments COMVANTAGE
 Advanced business process modelling support for collaborative interorganizational environments Result description The metamodel, which allows to model business processes with semantic query-able links to their enterprise context, was implemented in two tools. Result comments COMVANTAGE Result acronym ComVantage - BPM4CE
 Improved remote prediction and collaborative identification of machine defects to reduce downtimes Result comments COMVANTAGE
 Flexible workflow runtime for agile business environments Result comments COMVANTAGE
 Secure information sharing along a distributed product value chain Result comments COMVANTAGE
 Self-service business process modelling platform for interorganizational collaboration Result comments COMVANTAGE
 Relating machine and business data for added business value Result comments COMVANTAGE
 Simplified interface for remote machine access Result comments COMVANTAGE
 Cycle-time validation support for engineers for accelerated on-site plant commissioning operations Result comments COMVANTAGE
 Mobile support for production line equipment testing to speed up time-to-factory Result comments COMVANTAGE
 Consumer involvement in design & production process Result comments COMVANTAGE
 Improved production network logistics due to operation and process transparency via mobile devices Result comments COMVANTAGE
 Manufacturing the products of the future Taxon title Manufacturing the products of the future

Description (ii) The on-line reworking of the product in order to eliminate the defect. (iii) The on-line workpiece repair through defect elimination at consecutive process stages.
Organisation ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE
Comments Manufacturing the products of the future Manufacturing future products Complex structures, geometries and scale Manufacturing future products Manufacturing the products of the future Customised products
 Improved M3 Multi-sensor, Massive Measurement software suite Result title Improved M3 Multi-sensor, Massive Measurement software suite
 Multi-scale modelling from multi-sensor data fusion for visualization, design, analysis and additive manufacturing Result description - The future steps will be implemented in the scope of the demonstrators (WP7- AD2). Partners involved Technion (Lead Partner) POLIMI GAMESA Enki Trimek
 Process monitoring technology based on multi-scale, multi-sensor data fusion for high responsiveness while identifying manufacturing process deviations, applicable to small batch productions. Result acronym MuProD exploitable result n°5
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 RP 1.2 Advanced joining technologies for advanced and multi-materials Taxon description In order to be competitive in the future, these novel joining technologies should be implemented with a high degree of automation and quality control.

Description as soon as they are generated or in the case that it is possible, are going to be generated by predicting models • Allowing the use of less expensive machines, that can reduce their variability through
Organisation KATHOLIEKE UNIVERSITEIT LEUVEN
Comments results achieved thnaks to 4 demonstrators implemented in 10 test-cases related to 5 end-users.
 Improvement on workpiece metrology Result title Improvement on workpiece metrology Result acronym Improvement on workpiece metrology
 Improvement on Ultra-short pulse laser ablation process Result description Besides, a commercial auto-focus device has been implemented to work properly within a fs-laser context and, finally, a thermo-camera has been implemented on the machining set-up so part temperatures above
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 Advanced material processing technologies Taxon description are not developed for large scale.
 Number of developed systems and technologies Comments results achieved thnaks to 4 demonstrators implemented in 10 test-cases related to 5 end-users.

Description In order to reduce the need for physical prototypes and to reduce time-to-market, virtual training must overcome the problems of former approaches, e.g., inadequate authoring times, cost-prohibitive hardware
Organisation Serious Games Interactive
Comments Economic sustainability Manufacturing performance characteristics Supply chain and value network efficiency Manufacturing performance characteristics Economic sustainability Flexibility Manufacturing
 Knowledge Sharing Module Result title Knowledge Sharing Module
 Data Import, Filter and Mapping Result description Additionally, in close collaboration with the SCM and its services, a first version of the component and its sub-components has been implemented.
 User Interaction Module Result acronym User Interaction Module

Description will be run within the automotive supply chain.
Organisation Podjetje za ustanavljanje in upravljanje druzb
Comments Factories Pathway Data acquisition/monitoring/analysis (SCADA) implemented but isolated Pathways Dedicated software in silos Autonomous Smart Factories Pathway ERP-MOM systems connected Pathways Connected
 Value co-creation in the digital factory – The empowered role of shop floor workers Result title Value co-creation in the digital factory – The empowered role of shop floor workers
 Periodic Reporting for period 3 - FACTS4WORKERS (Worker-Centric Workplaces in Smart Factories) Result description The vision of FACTS4WORKERS is to leverage the large potential added value of...
 Data acquisition/monitoring/analysis (SCADA) implemented but isolated Taxon title Data acquisition/monitoring/analysis (SCADA) implemented but isolated
 RP 3.8 Mobility suite for comprehensive factory performance and resource management Taxon description Intuitive UIs that display the right data at the right time on decision makers’ mobile devices through an intermediate mobility infrastructure is furthermore a prerequisite for making the suite usable

Description This new generation is paramount to making the factories of the future more cost-effective and restoring the competitiveness of the European manufacturing industry.
Organisation HOGSKOLAN I SKOVDE
Organisation country Greece
Comments Manufacturing the products of the future Manufacturing future products Complex structures, geometries and scale Manufacturing future products Manufacturing the products of the future Customised products
 Flexible force control of robots in collaborative tasks Result title Flexible force control of robots in collaborative tasks Result acronym Flexible force control of robots in collaborative tasks
 Collision avoidance subsystem Result description A subsystem implemented for active collision avoidance
 Demonstrator 3: Human-Robot Collaboration - Mass Balance System Assembly Result comments SYMBIO-TIC Sweden Skovde
 Manufacturing the products of the future Taxon title Manufacturing the products of the future

Description The rising demand caused the copper price to increase significantly.
Organisation ALKE SRL
Organisation country France
Comments course of the Project.
 Report on the life cycle assessment Result title Report on the life cycle assessment
 Manufacturing of hybrid aluminum copper joints by electromagnetic pulse welding - identification of quantitative process windows Result description However, due to missing guidelines and tools for process design, the process has not been widely implemented in industrial production, yet.
 Thermo-mechanical simulation of a magnetic pulse welding process with first experimental validations Result comments JOIN-EM France Result acronym 23th Congrés Français de Mécanique
 RP 1.11 Product life cycle management for advanced materials Taxon title RP 1.11 Product life cycle management for advanced materials
 RP 1.2 Advanced joining technologies for advanced and multi-materials Taxon description In order to be competitive in the future, these novel joining technologies should be implemented with a high degree of automation and quality control.
 RP 6.6 Costing and manufacturability assessment Comments course of the Project.

Description The infrastructure will be developed as open source software under an Apache-type, permissive license.
Organisation AIDIMME - Instituto Tecnológico Metalmecánico, Mueble, Madera, Embalaje y Afines
Organisation country Türkiye
Comments The Service Monitoring collects data, which are necessary to monitor failures of services; this is implemented using the Circuit Breaker pattern [4].
 NIMBLE Platform SEED Programme: Manual and Materials Package Result title NIMBLE Platform SEED Programme: Manual and Materials Package Result comments NIMBLE Result acronym NIMBLE-339571
 User Experience Design for Fast System Adoption Result description A report showing UXD design perspectives in NIMBLE, to be implemented and tested for optimal interaction with the services of the platform Result comments NIMBLE
 Design of an Open API for the NIMBLE Platform Result comments NIMBLE
 Distributed Automation: Channel Management for Production Data Sharing Result comments NIMBLE
 AMBASSADOR Programme for Early Adopters (year 1) Result comments NIMBLE
 Semantic Modelling of Manufacturing Collaboration Assets Result comments NIMBLE
 Product and Service Search Engine and Search Mediator Result comments NIMBLE
 Project Business Plan (year 1) Result comments NIMBLE
 Supply Chain Negotiation Support Result comments NIMBLE
 Design and Implementation of Security and Privacy for Core Business Services Result comments NIMBLE
 User Front-End Prototype Result comments NIMBLE
 Dissemination and Communication Plan Result comments NIMBLE
 Core Platform Infrastructure Result comments NIMBLE
 Platform Architecture Specification and Component Design Result comments NIMBLE
 Requirements for Business Models and Collaboration Patterns in Supply Chains Result comments NIMBLE
 Catalogue Ingestion and Semantic Annotation Result comments NIMBLE
 Periodic Reporting for period 2 - NIMBLE (Collaboration Network for Industry, Manufacturing, Business and Logistics in Europe) Result comments NIMBLE
 Platform User Experience – Platform Manager’s Point of View Result comments NIMBLE
 Final Project Business Plan Result comments NIMBLE
 Trust and Reputation Management Result comments NIMBLE
 Security and Privacy Requirements Result comments NIMBLE
 Cost and Ecological Footprint Estimation for Product Life Cycles Result comments NIMBLE
 Platform User Experience from Supplier's and Buyer’s Point of View Result comments NIMBLE
 Customisation Methodology Result comments NIMBLE
 Services for Operational Supply Chain Management Result comments NIMBLE
 Platform User Experience from Data Sharers’ and from Logistics Providers’ Points of View Result comments NIMBLE
 Final Platform Architecture Specification and Component Design Result comments NIMBLE
 Raising Awareness in Open Source Communities Result comments NIMBLE
 Business Process Templates and Accelerators Result comments NIMBLE
 Information Quality Management Result comments NIMBLE
 Validation of the Furniture Manufacturing Platform Result comments NIMBLE
 NIMBLE Platform Evolvement – Recommendations, Requirements and Roadmap Result comments NIMBLE
 NIMBLE Platform Evolvement – Final Recommendations, Requirements and Roadmap Result comments NIMBLE
 Agent-Supported Negotiation for Optimization in the Value Network Result comments NIMBLE
 NIMBLE Platform Documentation. Result comments NIMBLE
 Final EU-level End-of-project Event Result comments NIMBLE
 NIMBLE collaborative platform: Microservice architectural approach to federated IoT Result comments NIMBLE
 Stackelberg Security Game for Optimizing Security of Federated IoT Platform Instances Result comments NIMBLE
 Digital Platform Ecosystems – from information transactions to collaboration impact Result comments NIMBLE
 An Ontology Framework for Multisided Platform Interoperability Result comments NIMBLE
 Cybersecurity Requirements for Supporting Enterprise Interoperability of Multi-sided Platforms Result comments NIMBLE
 Federated Byzantine Agreement to Ensure Trustworthiness of Digital Manufacturing Platforms Result comments NIMBLE
 Semantic Web: Ontological Search Approach Result comments NIMBLE
 An open source approach to the design and implementation of Digital Twins for Smart Manufacturing Result comments NIMBLE
 Federated Identity Management and Interoperability for Heterogeneous Cloud Platform Ecosystems Result comments NIMBLE
 An Architecture of IoT-Based Product Tracking with Blockchain in Multi-sided B2B Platform Result comments NIMBLE
 Governance Mechanisms for Federated Digital Platform Ecosystems Result comments NIMBLE
 A B2B Marketplace eCommerce Platform Approach Integrating Purchasing and Transport Processes Result comments NIMBLE
 B2B Platform Federation Result comments NIMBLE
 A new data model for logistics in furniture collaborations Result comments NIMBLE
 Federated Search Result comments NIMBLE
 Architecture, Business Case and Governance of the Furniture Manufacturing Platform Result comments NIMBLE
 Platform User Experience – Validation Methodology Result comments NIMBLE
 NIMBLE Federated Platform Launch Manual Result comments NIMBLE
 Project Business Plan, (year 2) Result comments NIMBLE
 Scientific and Technical Communication Report Result comments NIMBLE
 Feasibility and Impact Assessment Toolkit Result comments NIMBLE
 Advanced Platform Infrastructure Result comments NIMBLE
 Period 2 AMBASSADOR Programme for Early Adopters – Summary Report Result comments NIMBLE
 Data Analytics Result comments NIMBLE
 Tool for Collaboration Setup and Interoperability Testing Result comments NIMBLE
 FIWARE Taxon title FIWARE
 Open source Taxon description Open-source software (OSS) is a type of computer software whose source code is released under a license in which the copyright holder grants users the rights to study, change, and distribute the software
 Industrial Reference ICT Architectures Comments The Service Monitoring collects data, which are necessary to monitor failures of services; this is implemented using the Circuit Breaker pattern [4].

Description The core idea in Factory2Fit project is that the worker is an expert of his/her own work and thus (s)he shall have an active role in designing his/her work.
Organisation Collins Aerospace
Organisation country Greece
Comments Customised products Manufacturing future products Manufacturing the products of the future Customized production set challenges for the factory work Economic sustainability Manufacturing performance
 The Influence of Level of Automation, Adaptive Automation and Practice on Performance and Well-Being Result title The Influence of Level of Automation, Adaptive Automation and Practice on Performance and Well-Being
 Definition and planning of Factory2Fit’s pilots Result description The deliverable describes the pilots to be implemented.
 White paper - Human-centred factories from theory to industrial practice. Lessons learned and recommendations Result comments A4BLUE Factory2Fit HUMAN INCLUSIVE MANUWORK

Description The Z-Fact0r solution comprises the introduction of five (5) multi-stage production-based strategies targeting (i) the early detection of the defect (Z-DETECT), (ii) the prediction of the defect generation
Organisation ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE
Organisation country Greece
Comments to create a set of rules to implemented by the end user.
 Neco Use Case Result title Neco Use Case
 Report on MSL demo activities (M42) Result description The Z-Fact0r strategies will be implemented in the premises of MSL. This task will be linked with the results of the use case design in T1.4.
 Advanced material processing technologies Taxon description are not developed for large scale.
 Semantic/information interoperability Comments to create a set of rules to implemented by the end user.

Description The project outputs will impact on the entire value chain of the production automation market.
Organisation Vysoke uceni technicke v Brne
Organisation country France
Comments Service Oriented Architecture (SOA) concepts will be used to achieve a high degree of configurability, scalability and interoperability of the individual components, while maintaining the reliability,
 Prognosis and Health Management in electric drives applications implemented in existing systems with limited data rate Result title Prognosis and Health Management in electric drives applications implemented in existing systems with limited data rate
 Needs for future smart production (manufacturing) in Europe from the mechatronics and robotic point of view Result description It will provide guidelines for future actions to be implemented in order to overcome the gaps, based on principles of change management theory.
 Field Device Taxon title Field Device Comments Service Oriented Architecture (SOA) concepts will be used to achieve a high degree of configurability, scalability and interoperability of the individual components, while maintaining the reliability,
 Intelligent machinery components, actuators and end-effectors Taxon description Intelligent components enable the deployment of safe, energy-efficient, accurate and flexible or reconfigurable products and production systems.
 Connectivity & network interoperability – communication protocols Comments Service Oriented Architecture (SOA) concepts will be used to achieve a high degree of configurability, scalability and interoperability of the individual components, while maintaining the reliability,

Description This opens the vision of truly connected production processes where all machinery data are accessible allowing easier maintenance of them in case of unexpected events.
Organisation KONE INDUSTRIAL OY
Organisation country Greece
Comments Prediction - forecasting Addressed processes BAsed on the data analytics implementation the appropriate machine learning techniques will be implemented to enable the condition evaluation and
 White goods use case Result title White goods use case
 Elevators production use case Result description The SERENA testbed selected to be implemented to the Finn Power SB8 punching machine. The machine manufactures punched sheet metal parts for different elevator parts. Result acronym SERENA - KONE PILOT
 Metrology Equipment Use Case Result comments SERENA Spain Altube
 RP 3.2 Intelligent maintenance systems for increased reliability of production systems Taxon description Maintenance would increasingly take place before the failure occurs and when its impact is at minimum.

Description validate the UPTIME solution in the manufacturing companies participating in the UPTIME consortium and will diffuse the UPTIME solution in the manufacturing community.
Organisation Whirlpool Europe srl
Organisation country France
Comments These are based on the JWT technology and are implemented by using the Spring Security framework. Currently, JWT is used to ensure a secure log-in; as components are iteratively integrated.
 Whirlpool use case: Drum Dryer Production Line Result title Whirlpool use case: Drum Dryer Production Line Result description Currently, preventive and reactive maintenance is implemented and although needed, they exhibit many drawbacks.
 MAILLIS use case: Cold Rolling Mill Result comments UPTIME Greece KIFISSA
 FTT use case: Transportation Logistics Result acronym UPTIME - FTT USE CASE
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 Economic sustainability Taxon description Economic sustainability is the component of sustainability where the focus is on commercial competitiveness and the ability to do be successful from the business perspective.
 AAA - Access, Authorisation and Authentication Comments These are based on the JWT technology and are implemented by using the Spring Security framework. Currently, JWT is used to ensure a secure log-in; as components are iteratively integrated.

Description QU4LITY will demonstrate, in a realistic, measurable, and replicable way an open, certifiable and highly standardised, SME-friendly and transformative shared data-driven ZDM product and service model for
Organisation ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE
Organisation country France
Comments Product-Service Innovation Collaborative Product-Service Factories Pathway Service Innovation and new Business Models Pathways Product-Service Innovation Collaborative Product-Service Factories Pathway
 Pilot - GHI Real-time cognitive hot stamping furnace 4.0 Result title Pilot - GHI Real-time cognitive hot stamping furnace 4.0
 Pilot - RiaStone Autonomous Quality ZDM for “Ceramic tableware Single-firing” Result description In parallel new in-line automation components will be implemented that will automatically remove detected defective parts from the production lines; enabling the introduction of recycling and re-using
 Pilot - THYS Quality Management of Steering Gear based on Acoustic control Result comments QU4LITY France Florange
 D2.11 Reference Architecture and Blueprints (Version 1) Result acronym Autonomous Quality Reference Architecture

Description Current machine tools are complex mechatronic structures full of sensors and drives where control laws are implemented.
Organisation CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE (CNRS)
Organisation country France
Comments and smart factories & supply chains R&I Objective 1.3: Scalable, reconfigurable and flexible first-time right manufacturing MIE Consultation 2020 (Closed) Specific Objective 1: Excellent, responsive
 Machine Tool Component 5: Adaptive Fixturing Device Result title Machine Tool Component 5: Adaptive Fixturing Device
 Machine Tool Component 4: Eddy Current Damper Result description Tunable stiffness has been implemented by designing a rotary spring with variable stiffness in function of its orientation.
 Machine Tool Component 3: Magnetorheological Damper Result comments DYNXPERTS Nice
 Software Result 2: Stability Function for Heavy Duty Machines Result acronym MUTE II

Description Two pilot cases are currently being deployed in the context of demonstrating the added value of the Know4Car developments in the manufacturing sector: 1) Automotive Assembly: This pilot case is implemented
Organisation INNOVAZIONE AUTOMOTIVE E METALMECCANICA SCRL
Organisation country Greece
Comments Manufacturing the products of the future Manufacturing future products Customised products Manufacturing future products Manufacturing the products of the future Social sustainability Manufacturing performance
 Manufacturing Knowledge Management infrastructure including knowledge model Result title Manufacturing Knowledge Management infrastructure including knowledge model
 Assembly Line balancing agent Result description This is the core engineering feature of the Know4Car platform. It has been implemented as a web-service.
 Intelligent data management for a seamless and robust data availability Result acronym K4C_SQL Bridge
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 RP 3.2 Intelligent maintenance systems for increased reliability of production systems Taxon description Maintenance would increasingly take place before the failure occurs and when its impact is at minimum.