Projects overview

Sort by


Show more information
Description multi-data gathering by the integration of new sensor and inspection equipment, development of intelligent actuators and the development of new monitoring and prognosis knowledge-based models.
Organisation TECHNION - ISRAEL INSTITUTE OF TECHNOLOGY.
Comments of motor vehicles, trailers and semi-trailers Applications areas and sectors C MANUFACTURING C22 Manufacture of rubber and plastic products Applications areas and sectors C MANUFACTURING project_id_EC
 Utility tool for rapid calculation of the output of turning operations: cutting forces, expected maximum and mean roughness, torque and power consumption Result title Utility tool for rapid calculation of the output of turning operations: cutting forces, expected maximum and mean roughness, torque and power consumption
 Improved M3 Multi-sensor, Massive Measurement software suite Result description Geometries extractions 100% - Registrations 100% - Standards for results 90% - Full automation 90% Next steps: - Optimize scanning parameters to minimize time - Final comparison to measurements with other
 C22 Manufacture of rubber and plastic products Taxon title C22 Manufacture of rubber and plastic products
 RP 2.9 Multi-disciplinary engineering tools for mechatronics engineering Taxon description Multidisciplinary modelling and virtual validation of manufacturing equipment at design stage, prior to any actual manufacturing step, is the key for ensuring proper performance of such equipment without
Show more information
Description KRAKEN will develop a disruptive hybrid manufacturing concept to equip SME and large industries with affordable All-in-one machine for the customised design, production/reparation and quality control of
Comments other resources in manufacturing systems FoF Partnership SRIA Research priorities Domain 5: Human-centric manufacturing RP 5.5 New recommendation systems for the European workforce FoF Partnership SRIA
 Influence of Interpass Temperature on Wire Arc Additive Manufacturing (WAAM) of Aluminium Alloy Components Result title Influence of Interpass Temperature on Wire Arc Additive Manufacturing (WAAM) of Aluminium Alloy Components
 Periodic Reporting for period 2 - KRAKEN (Hybrid automated machine integrating concurrent manufacturing processes, increasing the production volume of functional on-demand using high multi-material deposition rates) Result description Different concepts were identified around the realms of KRAKEN in 2016, these correspond to both current challenges and solutions proposed in the project.
 RP 5.4 New ways of interaction and collaboration between workers and other resources in manufacturing systems Taxon title RP 5.4 New ways of interaction and collaboration between workers and other resources in manufacturing systems
 Advanced materials in manufacturing systems Taxon description Increased smartness in the manufacturing equipment also enables a systems approach with machines able to learn from each other and impacting on the human-machine interface.
Show more information
Description The unique constellation and complementarity of KYKLOS 4.0 partners allows driving innovation of CM technologies and services along the whole manufacturing value chain.
 Electronic Devices/Equipment Pilot – Electrical Equipment Manufacturers (VESTEL) Result title Electronic Devices/Equipment Pilot – Electrical Equipment Manufacturers (VESTEL)
 Electronic Equipment Industry Pilot (CONTINENTAL) Result description Electronic equipment industry pilot use case aims at improving the maintenance process of the equipment in the production line of CONTINENTAL’s factory.
Show more information
Description The complementary expertise of the academic and industrial European partners in the project enables knowledge sharing, dissemination and exploitation of scientific findings, industrial applications and
Comments C28 Manufacture of machinery and equipment n.e.c.
 Machine Availability Monitoring Module Result description - Motivation / Need: Disturbances on manufacturing shop-floors and the increasing number of product variants necessitate adaptive and flexible process planning methods.
 C27 Manufacture of electrical equipment Taxon title C27 Manufacture of electrical equipment
 Reducing the consumption of water and other process resources. Taxon description Reduction of resources other than energy (materials, water, etc.)
Show more information
Description Statistical reliability and maintenance models for detection of critical elements and definition of their reliability will also prevent sudden machine breakdowns and allow defining the most cost-efficient
Comments energy Manufacturing performance characteristics Environmental sustainability Reducing the consumption of water and other process resources.
 Integrated of ambliFibre systems Result title Integrated of ambliFibre systems
 LCA Technical Report and Sustainability Product Declaration Result description the considered technology, then taking into account main aspects as, for instance, tape systems, polymers, fibres, liner materials, laser and optical devices, other machines (e.g. winding machines).
 Innovative re-use of equipment Taxon title Innovative re-use of equipment
 Reducing the consumption of water and other process resources. Taxon description Reduction of resources other than energy (materials, water, etc.)
Show more information
Description The outline of the business plan ensures the exploitation of the project results.
Comments the communion cell allows to manufacture complex 3D rpdocuts with smart properties R&I Objective 1.6: Data ‘highways’ and data spaces in support of smart factories in dynamic value networks MIE
 Periodic Reporting for period 3 - ComMUnion (Net-shape joining technology to manufacture 3D multi-materials components based on metal alloys and thermoplastic composites) Result title Periodic Reporting for period 3 - ComMUnion (Net-shape joining technology to manufacture 3D multi-materials components based on metal alloys and thermoplastic composites)
 An approach for the design of multi-material mechanical components Result description the Institution of Mechanical Engineers, Part B: Journal of Engineering ManufactureJournal publisher: Professional Engineering Publishing Ltd.Published year: 2018Published pages: 095440541876399DOI identifier
 RP 2.8 High performance and resource-efficient manufacturing equipment by applying advanced materials Taxon title RP 2.8 High performance and resource-efficient manufacturing equipment by applying advanced materials
 Advanced materials in manufacturing systems Taxon description Increased smartness in the manufacturing equipment also enables a systems approach with machines able to learn from each other and impacting on the human-machine interface.
Show more information
Description material for multi-material additive manufacturing processes; and To facilitate the manufacture of components which are currently impossible or very difficult to produce by subtractive processes (e.g
Comments energy Manufacturing performance characteristics Environmental sustainability We will be using less powder in AM reduce energy consumption for the laser- Reducing the consumption of water and other process
 As-exact-as-possible repair of unprintable STL files Result title As-exact-as-possible repair of unprintable STL files
 Periodic Reporting for period 2 - CAxMan (Computer Aided Technologies for Additive Manufacturing) Result description This not only affects the costs of material used and energy spent. The objectives of...
 Reducing the consumption of water and other process resources. Taxon title Reducing the consumption of water and other process resources. Taxon description Reduction of resources other than energy (materials, water, etc.)
Show more information
Description academy, which have very strong product development capabilities, but depend on the existing technologies for the manufacturing, due to their difficulty for development their own materials processing equipment
Organisation University of AVEIRO
Comments for other IPMs.
 Final Report Summary - FABIMED (Fabrication and Functionalization of BioMedical Microdevices) Result title Final Report Summary - FABIMED (Fabrication and Functionalization of BioMedical Microdevices)
 C22 Manufacture of rubber and plastic products Taxon title C22 Manufacture of rubber and plastic products
 RP 1.7 High Volume Manufacturing at the micro- and nano-scale Taxon description The combination of different technologies to obtain the final product introduces system level problems such as the transport of micro-parts, the coherence of the reference system in the different production
 IPM - Professional assistance is engaged Comments for other IPMs.
Show more information
Description Borealis project aims to develop a completely new concept of additive manufacturing machine: the solution is conceived as integration of a new architecture, a new manufacturing processes, a specific monitoring
Organisation University of applied sciences and arts of southern switzerland (SUPSI)
Comments specific dissemination materials Participation to trade fairs, conferences and exhibitions Interaction with other EU projects Involvment of potential users Other Success Factors connection with other
 Definition of reference medtech, aerospace and automotive products scenarios Result title Definition of reference medtech, aerospace and automotive products scenarios
 BOREALIS CNC and CAx chain Result description The most relevant component of the automation system architecture is the CNC, to execute the machining of the Borealis part, which includes also a PLC, to coordinate the execution of other components of
 RP 2.6 Mechatronics and new machine architectures for high performance and resource-efficient manufacturing equipment Taxon title RP 2.6 Mechatronics and new machine architectures for high performance and resource-efficient manufacturing equipment
Show more information
Description Inter-operability, ease of retrofit and scalability are critical parameters that are taken carefully into account in devising such IIMS. 
Organisation UNIVERSITY COLLEGE CORK - NATIONAL UNIVERSITY OF IRELAND, CORK
Comments of computer, electronic and optical products Applications areas and sectors C MANUFACTURING C28 Manufacture of machinery and equipment n.e.c.
 D4.2 Design of the Security Framework II Result title D4.2 Design of the Security Framework II
 D4.5 Prototype of the Security Framework II Result description Transport security
 C28 Manufacture of machinery and equipment n.e.c. Taxon title C28 Manufacture of machinery and equipment n.e.c.
 RP 5.4 New ways of interaction and collaboration between workers and other resources in manufacturing systems Taxon description The expected and extensive collaboration between future knowledge workers and robots (as well as other advanced automation equipment) will be crucial for successful human-centric manufacturing.
Show more information
Description the industrial take-up of digital technologies and digital platforms by taking into account legacy systems, industrial requirements and challenges, Situating inspiring research and industrial state-of-the-art
Organisation RISE Research Institutes of Sweden
 Report summarizing main contributions to other WPs - First iteration Result title Report summarizing main contributions to other WPs - First iteration Result description Report summarizing the updates in the wiki on Business models, Legal aspects, interoperability and standardization, Cybersecurity and Human aspects and main contribution to other WPs - First Iteration
Show more information
Description An important part of the test bed was the network created, and the cross-functional teams of researchers, companies and external experts who worked on the pilot cases.
Organisation RISE Research Institutes of Sweden
Comments energy Manufacturing performance characteristics Environmental sustainability Reducing the consumption of water and other process resources.
 Reducing the consumption of water and other process resources. Taxon title Reducing the consumption of water and other process resources. Taxon description Reduction of resources other than energy (materials, water, etc.)
Show more information
Description It is first kind of the machine developed specifically for the manufacture of miniature to micro-sized bulk components with controlled micro-structures, using a wide range of powder materials.
Organisation ETA SA MANUFACTURE HORLOGERE SUISSE AG
Comments Special tooling techniques and tooling materials are developed to manufacture these componens.
 Final Report Summary - MICRO-FAST (A FAST process and production system for high-throughput, highly flexible and cost-efficient volume production of miniaturised components made of a wide range of materials) Result title Final Report Summary - MICRO-FAST (A FAST process and production system for high-throughput, highly flexible and cost-efficient volume production of miniaturised components made of a wide range of materials
 Micro-FAST prototype machine Result description This is effected by a dedicatedly developed in-situ transport system.
 Replication, Equipment for flexible scalable prod/Assembly , Coatings Taxon title Replication, Equipment for flexible scalable prod/Assembly , Coatings
 Advanced materials in manufacturing systems Taxon description Increased smartness in the manufacturing equipment also enables a systems approach with machines able to learn from each other and impacting on the human-machine interface.
 Complex structures, geometries and scale Comments Special tooling techniques and tooling materials are developed to manufacture these componens.
Show more information
Description Here, a significant impact is expected for SME and industry end users and suppliers of composite structures as well as of facilitators providing measurement systems and software solutions.
Comments priorities Sub-Domain 2.1 Adaptive and smart manufacturing devices, components and machines Domain 2: Adaptive and smart manufacturing systems RP 2.7 Micro-precision into micro and macro-production equipment
 RP 2.7 Micro-precision into micro and macro-production equipment Taxon title RP 2.7 Micro-precision into micro and macro-production equipment
 RP 1.7 High Volume Manufacturing at the micro- and nano-scale Taxon description The combination of different technologies to obtain the final product introduces system level problems such as the transport of micro-parts, the coherence of the reference system in the different production
Show more information
Description The new manufacturing concept is based on the combination of fully automated, self contained, “white room” modules whose components - robots, end effectors, transport, handling and tooling
Organisation University of applied sciences and arts of southern switzerland (SUPSI)
Comments Success Factors Demonstration and upscaling (UPSCALE) UPSCALE - Assessment of technical readiness of both equipment and process for industrial use Success Factors Demonstration and upscaling (UPSCALE
 Multi-level Optimization of white’R behavior over time Result title Multi-level Optimization of white’R behavior over time
 white'R process planning system Result description equipment dynamics.
 Innovative re-use of equipment Taxon title Innovative re-use of equipment
 Methods for handling of parts, metrology and inspection Taxon description Methods for handling of parts, metrology and inspection require development also to ensure ability to manufacture at scale (volume) with high reliability.
Show more information
Description In short, the innovative REProMag SDS process has the potential to manufacture complex structures of high quality and productivity with minimum use of material and energy, resulting in significant economic
Organisation THE UNIVERSITY OF BIRMINGHAM
Comments - Understand and agree on the milestones from proof-of-concept up to industrial deployment Demonstration and upscaling (UPSCALE) UPSCALE - Assessment of technical readiness of both equipment and process
 Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface Result title Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface
 Periodic Reporting for period 2 - REProMag (Resource Efficient Production Route for Rare Earth Magnets) Result description All these products are now an integral part of modern life in...
 RP 2.8 High performance and resource-efficient manufacturing equipment by applying advanced materials Taxon title RP 2.8 High performance and resource-efficient manufacturing equipment by applying advanced materials
 RP 1.7 High Volume Manufacturing at the micro- and nano-scale Taxon description The combination of different technologies to obtain the final product introduces system level problems such as the transport of micro-parts, the coherence of the reference system in the different production
Show more information
Description Nowadays, these systems are of table-top size and cost a fraction of the price of conventional clean-room equipment.
Organisation UNIVERSITY OF SOUTHAMPTON
Comments UPSCALE - Assessment of technical readiness of both equipment and process for industrial use Success Factors Demonstration and upscaling (UPSCALE) UPSCALE - Organisational aspects of upscaling have been
 FEMTOPRINT® solution for the production of 3D micro- and nano-devices in transparent substrate. Result title FEMTOPRINT® solution for the production of 3D micro- and nano-devices in transparent substrate. Result description A prototype of table-top Femtoprinter has been developed. This prototype is commercialized by a company, spin-off of the project.
 C26 Manufacture of computer, electronic and optical products Taxon title C26 Manufacture of computer, electronic and optical products
Show more information
Description up-to-date and advanced facilities based on three main modules: a tool-manufacturing module, which involves different technologies for micro-nano direct manufacturing, an injection-moulding module, including equipment
Comments Domain 1 - Advanced Manufacturing Processes Impact Workshop D1-Area 2: Micro and Nano-scale Manufacturing Impact Workshop Domain 1 - Advanced Manufacturing Processes Number of patent applications Additional
 Process chain based on self-assembly processes (polymer demixing, nanosphere lithography, interference lithography) for the fabrication of nanostructure replication tools Result title Process chain based on self-assembly processes (polymer demixing, nanosphere lithography, interference lithography) for the fabrication of nanostructure replication tools
  Contact-free sensor for pressure measurements in mould cavities. Result description This is the case where no whitness marks are allowed on a part or when other influencing parameters than pressure need to be measured.
 RP 1.5 Delivery of new functionalities through (mass production) surface manufacturing processes Taxon title RP 1.5 Delivery of new functionalities through (mass production) surface manufacturing processes
 RP 1.7 High Volume Manufacturing at the micro- and nano-scale Taxon description The combination of different technologies to obtain the final product introduces system level problems such as the transport of micro-parts, the coherence of the reference system in the different production
Show more information
Description The overall objective of the Flex-o-Fab project is the demonstration of a reliable manufacturing process for OLED lighting foils enabling market introduction within 3 years after the end of the project
Organisation Tampere University of Technology
Comments Manufacturing the products of the future Manufacturing future products Novel materials Manufacturing future products Manufacturing the products of the future Customised products Manufacturing future
 Flexible OLED demonstrator made using a roll-to-roll produced moisture barrier as substrate Result description The barrier film was produced roll-to-roll and temporarily bonded to a glass carrier for sheet-to-sheet deposition of the electrode and OLED layers, using a pilot chain of tools and equipment at various
 Manufacturing the products of the future Taxon title Manufacturing the products of the future
 RP 1.2 Advanced joining technologies for advanced and multi-materials Taxon description The latter should be supported by appropriate simulations of both equipment and manufactured parts.
Show more information
Description Scale-up of device area (>100cm2) to high throughput production (web speed >1m/min.) without degradation of performance or yield is a key objective of the project.
Comments the TREASORES project is to facilitate roll-to-roll manufacture of OPV devices (solar cells) and OLED and OLEC devices (for illumination) Mechatronics and robotics technologies Technologies and enablers
 C26 Manufacture of computer, electronic and optical products Taxon title C26 Manufacture of computer, electronic and optical products
 RP 1.7 High Volume Manufacturing at the micro- and nano-scale Taxon description Methods for automatic handling of parts, in line metrology and inspection also require development to ensure ability to manufacture at scale with high reliability.
Show more information
Description Leading pre-standardization activities in the areas of collaborative robotics, AGVs and use of IoT devices on the shopfloor.
Organisation Eindhoven University of Technology
Comments Hence, knowledge transfer takes place not only between component developers, but also between disciplines within universities and research institutes to develop techniques based on other disciplines: 
 Definition of FSTP experiments Result title Definition of FSTP experiments
 Utilisation of AR/VR communication & remote sensing Technologies for Technical Support between Remote Plants of Arçelik Result description visiting, equipment transport and travel needs) and reduce the error-rate caused by humans.
 R&I Objective 4.1: Digital platforms and engineering tools supporting creativity and productivity of manufacturing development Comments Hence, knowledge transfer takes place not only between component developers, but also between disciplines within universities and research institutes to develop techniques based on other disciplines: 
Show more information
Description The consortium consists of all key players that will play a future role in the manufacturing of such large carbon fibre parts.
Comments Applications areas and sectors C MANUFACTURING C30.3 Manufacture of air and spacecraft and related machinery Applications areas and sectors C30 Manufacture of other transport equipment C MANUFACTURING
 Sensor for monitoring of curing processes Result title Sensor for monitoring of curing processes
 Data Management Plan Result description Plan describing the collection and use of data in the project and in particular how and which data will be made available to other researchers after the end of the project.
 C28 Manufacture of machinery and equipment n.e.c. Taxon title C28 Manufacture of machinery and equipment n.e.c.
 Methods for handling of parts, metrology and inspection Taxon description Methods for handling of parts, metrology and inspection require development also to ensure ability to manufacture at scale (volume) with high reliability.
Show more information
Description However, the European manufacturing industry is facing the following challenges: lack of adaptability, lack of flexibility, and lack of vertical integration.
Comments Applications areas and sectors C MANUFACTURING C30.3 Manufacture of air and spacecraft and related machinery Applications areas and sectors C30 Manufacture of other transport equipment C MANUFACTURING
 Complex extension of research laboratory Result title Complex extension of research laboratory
 Planning and control cockpit Result description Human, robots and other resources capable of operating within a workstation are supported either for individual production or shared depending on the selected production criteria, i.e. meet production
 Flexible force control of robots in collaborative tasks Result acronym Flexible force control of robots in collaborative tasks
 C28 Manufacture of machinery and equipment n.e.c. Taxon title C28 Manufacture of machinery and equipment n.e.c.
 Reducing the consumption of water and other process resources. Taxon description Reduction of resources other than energy (materials, water, etc.)
Show more information
Description A key feature of Fortissimo 2 will be the adaption of the Marketplace to meet the needs of end-users.
Organisation THE UNIVERSITY OF EDINBURGH
Comments of air and spacecraft and related machinery Applications areas and sectors C30 Manufacture of other transport equipment C MANUFACTURING Product quality - Quality assurance Manufacturing performance characteristics
 Cloud-based HPC processing for knowledge generation in camshaft manufacture Result title Cloud-based HPC processing for knowledge generation in camshaft manufacture
 Cloud-based simulation for vehicle engineering Result description However, simulating airflow with the required degree of accuracy requires computing power beyond the reach of most designers, mainly due to the capital costs of the equipment.
 C28 Manufacture of machinery and equipment n.e.c. Taxon title C28 Manufacture of machinery and equipment n.e.c.
 Cognitive and artificial intelligence (AI) technologies - machine learning Taxon description Colloquially, the term "artificial intelligence" is used to describe machines that mimic "cognitive" functions that humans associate with other human minds, such as "learning"
Show more information
Description disturbances and uncertainties and keep the robustness of the overall network.
Organisation Karlsruhe Institute of Technology
Comments , except machinery and equipment Applications areas and sectors C MANUFACTURING C27 Manufacture of electrical equipment Applications areas and sectors C MANUFACTURING C30 Manufacture of other transport
 Final Report Summary - ROBUSTPLANET (Shock-robust Design of Plants and their Supply Chain Networks) Result title Final Report Summary - ROBUSTPLANET (Shock-robust Design of Plants and their Supply Chain Networks)
 Optimal configuration strategies in production networks Result description The inputs to this tool are analytically modelled network objects (production sites, technologies, material- and component supplier, transport strategies), stochastic models of external and internal uncertainty
 C30 Manufacture of other transport equipment Taxon title C30 Manufacture of other transport equipment
Show more information
Description 52-70% and reduction of 25-30% of lifecycle costs.
Organisation University of Brescia
Comments of other transport equipment Applications areas and sectors C MANUFACTURING C29 Manufacture of motor vehicles, trailers and semi-trailers Applications areas and sectors C MANUFACTURING project_id_EC
 (KER 5.1)FIDIA development of a CBM SW for the Machine Tool CNC Result title (KER 5.1)FIDIA development of a CBM SW for the Machine Tool CNC Result description The knowledge of the health state of the equipment will improve the planning/scheduling of maintenance activities reducing the overall maintenance costs for FIDIA.
 C30 Manufacture of other transport equipment Taxon title C30 Manufacture of other transport equipment
 RP 2.6 Mechatronics and new machine architectures for high performance and resource-efficient manufacturing equipment Taxon description With the aim of ensuring competitiveness of manufacturing companies in a sustainable manner, the goal of high performance and reliability of manufacturing equipment must be achieved with a minimum of environmental
Show more information
Description Producing parts that do not meet the requirements leads to negative economic impacts, from wasted manufacturing resources to the need of more expensive equipment for manufacturing and quality control.
Comments and sectors C MANUFACTURING C30 Manufacture of other transport equipment Applications areas and sectors C MANUFACTURING C30.3 Manufacture of air and spacecraft and related machinery Applications areas
 CREATECH MEDICAL Result description During the design and manufacture of the prosthesis, exceptional care must be taken on the frame-implant connections.
 C30 Manufacture of other transport equipment Taxon title C30 Manufacture of other transport equipment
 RP 1.8 Robust micro- and nano-enabled production Taxon description Aspects of machining or manufacturing at nano-scale and the effect on production equipment and workers also need to be taken into account.
Show more information
Description through a more efficient use, at factory level, of material and energy resources.
Organisation Chalmers University of Technology
Comments C30.3 Manufacture of air and spacecraft and related machinery Applications areas and sectors C30 Manufacture of other transport equipment C MANUFACTURING C26 Manufacture of computer, electronic and optical
 Energy-Optimal scheduling and control of multi-robot automated assembly Result title Energy-Optimal scheduling and control of multi-robot automated assembly
  PLC software tool for energy optimal control of robot stations Result description usage of all equipments.
 C30 Manufacture of other transport equipment Taxon title C30 Manufacture of other transport equipment
 Methods for handling of parts, metrology and inspection Taxon description Methods for handling of parts, metrology and inspection require development also to ensure ability to manufacture at scale (volume) with high reliability.
Show more information
Description At the line control level a service oriented architecture will enable: Autonomous communication between resources for deciding on adaptation actions The effortless integration of new equipment.
Organisation DICAM UNiversity of Bologna
Comments Applications areas and sectors C MANUFACTURING C30 Manufacture of other transport equipment Applications areas and sectors C MANUFACTURING C25 Manufacture of fabricated metal products, except machinery
 Final Report Summary - AUTORECON (AUTOnomous co-operative machines for highly RECONfigurable assembly operations of the future) Result title Final Report Summary - AUTORECON (AUTOnomous co-operative machines for highly RECONfigurable assembly operations of the future)
 Flexible gripper as a whole product Result description If other subassemblies are to be handled, then it requires tool changing. So, setup time will increase. The robots have fixed location.
 C30 Manufacture of other transport equipment Taxon title C30 Manufacture of other transport equipment
 Domain 2: Adaptive and smart manufacturing systems Taxon description The set of research priorities under this domain focuses on innovative manufacturing equipment at component and system level, including mechatronics, control and monitoring systems The research priorities
Show more information
Description other resources.
Comments Applications areas and sectors C MANUFACTURING C29 Manufacture of motor vehicles, trailers and semi-trailers Applications areas and sectors C MANUFACTURING C30 Manufacture of other transport equipment
 Documentation of results of the stakeholder consultations Result title Documentation of results of the stakeholder consultations Result description Documentation of results of the stakeholder consultations
 C30 Manufacture of other transport equipment Taxon title C30 Manufacture of other transport equipment