Radial forging is widely used in industry to manufacture components for a broad range of sectors including automotive, medical, aerospace, rail and industrial. The Advanced Forming Research Centre (AFRC) at the University of Strathclyde, Glasgow, houses a GFM SKK10/R radial forge that has been used as a testbed for this project. Using two pairs of hammers operating at 1200 strokes/min, and providing a maximum forging force per hammer of 150 tons, the radial forge is capable of processing a range of metals, including steel, titanium and inconel. Both hollow and solid material can be formed with the added benefit of creating internal features on hollow parts using a mandrel. Parts can be formed at a range of temperatures from ambient temperature to 1200 °C.
For the provided data set, a total of 80 parts were forged over one day of operation. A machine failure occurred during the forging of part number 70, and this part was re-run once the malfunction had been fixed. Each forged part was then measured using a CMM to provide dimensional output relative to a target specification and tolerances. The CMM records 16 dimensional measurements.
| Web resources: | https://zenodo.org/record/2573861#.XG2S8y1oRQY |
- No items published
- Not specified