iDev40 | Integrated Development 4.0
01-05-2018
-31-10-2021
01-05-2018
-31-10-2021
01-06-2016
-30-09-2019
01-07-2015
-31-07-2018
01-01-2019
-31-07-2022
The objective of the pilot is to enable smart machines with autonomous diagnosis based on machine condition monitoring.
FAGOR ARRASATE as a leading manufacturer of forming machines it is obliged to proactive participate in projects like QU4LITY and led solutions to the customers to improve the availability, performance and quality of their installations and get an optimum cost per part ratio.
FAGOR ARRASATE has a long experience in delivering press machines as well as providing the building blocks of such lines. A press machine is the product par excellence of FAGOR ARRASATE. A typical press machine is composed by two rigid platforms (head and base), a bed, a ram, and a mechanism as well as all the other surrounding components that guarantee the full automation and process control.
Historically, machine tool manufacturers have not had any information of the machine behaviour once they were working at the customer facilities. Maintenance actions by the machine tool supplier, where mainly started by a customer’s call and where mainly related to corrective actions, once the failure had already happened.
Currently many condition issues on the machine are detected afterwards, they appear when a quality matter is detected on the forming parts or a machine component is damaged, causing even machine stoppage. These problems are fixed by machine adjustment or changing programs or forming process parameters.
Consequently, the only way to avoid future problems is by preventive maintenance or machine adjustment actions. These are carried out either by the machine owner itself or external services which are sometimes delivered by FAGOR ARRASATE.
In QUALITY project, FAGOR ARRASATE will equip a press machine with a SMART CONNECT technology that provides data from the machine, to the owner and to the machine supplier. Within the context of Zero-Defect Manufacturing, FAGOR ARRASATE will develops Smart solutions that will anticipate and avoid failures, reduce downtimes and assure quality.
It has a great complexity from the point of view of the acquisition, measurement and transmission of the parameters and variables. The result that would be obtained from the QU4LITY project, would allow the customers of FAGOR ARRASATE to have total control of a zero defects manufacturing process at machine level and to know at any time how and under which conditions all the parts have been manufactured.
Within Qu4lity use case, GHI with the collaboration of Innovalia and SQS, is building a ZDM scenario based on the development of a smart and connected hot stamping process with the ability to correlate the furnace operation parameters with the quality control of the stamped parts, extending in this way the product lifecycle control loop, making the operator more involved in the process thanks to the new platform developed.
Kolektor's Qu4lity project is addressing the real-time injection moulding process monitoring-control. The scope of the pilot project is a production line where Kolektor produces one type of product. The aim of this pilot is to detect, possibly predict, and remove the cause of the process failure as soon as possible, ideally in real-time. Based on the collected data and by applying the control loops, advanced analytics, and artificial intelligence methods we are trying to better understand the moulding process, with the emphasis on detecting anomalies and failures as soon as possible.
The POWDER BED Additive technology will be considered to test new edge devices for process control, towards a ZDM result, and to work on data management and analytics to implement the whole manufacturing process by a platform approach.
Data monitored from the machine tool and meta-information generated by different applications running at edge level will be collected and elaborated by the data analysis tool to extract useful information to be sent to the decision support system.
Using the opportunities brought by the Qu4lity project, RiaStone with the collaboration of Synesis and IntraSoft, built a commercial grade ZDM implementation scenario, which brings to the ceramics industry the ability to implement Autonomous Quality Loops, which will add new approaches to production, promoting better and innovative defect management and production control methods, consistent with the integration of Zero defect Manufacturing processes, these being namely: in-line inspection technologies, and integration of ICT tools for autonomous, automatic, smart system decision taking
The production line in Amberg has a highly automated process with several test stations along the path.
Main technologies that will be adopted in this pilot:
The machines (OT) are connected to intelligence in the Edge and Cloud (IT) for generation of Zero Defect Manufacturing functions
For many years, and in the context of INDUSTRY 4.0, FAGOR ARRASATE is working together with IKERLAN in smart platform for press machines and industrial processes. The platform goes from the sensitization of the machine’s critical elements to the remote monitoring of press conditions. The platform focuses on improvement of asset management and OEE (Overall Equipment Effectiveness) and allows FAGOR ARRASATE to increase quality of service for their clients.
We are building a connected environment through the industrial furnace smartization, but also implementing an IT solution that enables data gathering and transferring on real-time to GHI server, where then the data analysis is performed.
We are developing Sinapro IIoT MES/MOM cloud solution (part of the Kolektor Digital Platform) as the cornerstone of the MOM system which enables real-time collecting, evaluating, validating, filtering, checking, and storing of production data. The captured production data can be processed in real-time for the purpose of obtaining various production information, which enables immediate action. MOM function for production analyses with depth learning technology of AI gives users additional and high-quality information’s for fast decisions to achieve zero-defect goals in production.
Operators are connected to the smart funcions the receive valuable information related to components condition that allow them to take decisions related to machine and process. Maintenance technitians and specialized engineers from the machine tool provider can also be included in the process.
Operators are more involved in the whole process, but mainly receives valuable information of the furnace operation through the real-time monitoring interface of the platform. Also daily reports provide them valuable information.
The Kolektor Digital Platform enables human involvement on various levels. Human operators can monitor, view and inspect created datasets. During the process of model training, the operator can monitor the current state and detailed information of the training process. The Kolektor Digital Platform opens a channel between a data scientist and a decision-making individual in the production line. It is desirable to have multiple people, each assigned to a specific task. The whole process could be split into subtasks - acquiring images on the production line, human expert labeling the images (classification, anomaly,..), data scientist training the model on the new dataset and at the end evaluation of the model and pushing the new (improved) model to the production line.
The RiaStone Qu4lity Pilot enables human involvement at various levels and production stages.
Human operators inspect, monitor, and view all created datasets. During the process of model training, the operator guides the ML algorithm through the image inspection training process.
This is performed after the image acquisition in the production line, through joint algorithm/human expert labeling of the images (new defect classification, conformant/non-conformant product), this allowing for the training of the algorithm in the existing defects dataset, and at evolving the algorithm and pushing the new (improved) model to the production line AQL platform
The gathering of data from the machines during their lifetime allows the generation of valuable information for the improvement, not only of the actual machine and process, but also the future machines and smart functions that are continously improved through data based engineering and design.
FAGOR FA-Link MAP (Fagor Arrasate Link MAchine Platform) is a platform developed by FAGOR ARRASATE in collaboration with IKERLAN. This platform uses cutting edge technologies for big data processing and visualization. This platform inputs the data from the press machine using the FAGOR (Data-Adquisition System) and provides to the different stakeholders an UI with a set of views to monitor and analyze the press machine performance. The UI is customizable by the end user and the data to be shown is manually configured as different views and alarms in FA-LINK visualization UI.
FAGOR’s monitoring platform, FA-Link machine platform, is being extended with tools focused on ZDM in this pilot and in the related packages of QU4LITY.
FA-Link is composed by two systems, the former that is executed in the manufacturing plant (on premise) and the latter that is executed in the cloud. The data captured in plant via on premise (local view), is uploaded and aggregated in the cloud part (global view).
The Amberg production line collects all the process and test data an a quality management system data base. This allows reporting and production KPI analysis as well as supply chain management.
Analyses Stations are equiped with Semantik Search Technology in order to generate consistent Data between standard failure catalogues and Teammember entries into Analyses Client.
FAGOR’s monitoring platform, FA-Link machine platform, is being extended with tools focused on ZDM in this pilot and in the related packages of QU4LITY.
FA-Link is composed by two systems, the former that is executed in the manufacturing plant (on premise) and the latter that is executed in the cloud. The data captured in plant via on premise (local view), is uploaded and aggregated in the cloud part (global view).
The Beyond Platform also gathers data from other assets, not only from the furnace, so they can potentially optimised as well. On the other hand, there are aspects regarding the industrial furnace that mainly affects to the whole factory level, as for example, a reduction on the energy consumption or a reduction on the defective manufacturing that can be achieved thanks to the data analysis provided through this tools.
Analysing the test results the production process can be adapted and optimized.
The on-premise system is responsible of capturing the data from the different sensors and upload such information to the cloud. This task is performed by a software called FAGOR-DAS. Through FAGOR-DAS, data published by the sensors via PLCs using industrial protocols, such as OPC-UA, are sampled. After this data is gathered, it is analysed and compacted locally (Edge computing). Such data can be visualized via a tool called Visual Stamp (local view of the manufacturing line). The same data is prepared to be sent to the cloud infrastructure.
The Beyond platform implemented provides valuable information with daily, monthly reports and deeper analysis in concrete operations that allows technicians to optimize the machine (industrial furnace) operation.
The Kolektor Digital Platform enables us to automatically collect the data from the shop floor. The Sinapro IIoT enables the connectivity of the pilot production line machines and related IoT devices for real-time production data acquisition and monitoring. The acquired data is afterward used in the off-line machine learning pipelines to produce machine vision predictive models to detect visual injection moulding defects. A pipeline for deploying such off-line machine learning to a HPC cluster is being developed at JSI within the scope of the Kolektor Pilot.
AI vision algorithm developed by TNO (WP3) seems to filter bad rated parts compared to installed algorithm. Advantage can be when product print is changing to catch-up development speed in traditional algorithm development. Test-case currently in progress.
Analyzing the test and process data, specific machine parameters can be adapted and optimized.
A correlation is realized within the production line between the overall process parameters and the product characteristics which are monitored at the end of the line in specific control modules.
With the help of INTRASOFT algorithm, several optimization are suggested for process parameters in order to optimize the final control workstation and to diminuate scraps and rework parts.
In addition to that, we can use CEA non-intrusive assets aquisition system to localize machine-oriented rootcauses (process deviation due to mechanical issue in the workstation for instance). This could lead to quickly identify a rootcause and to implement corrective actions effectively.
The non-intrusive notion comes from the fact that the asset monitoring (which can be a vibration from an accelerometer, a current, a temperature, ...) does not require any heavy integration, even the link with PLC is simplified with a standard exchange table for record triggers and the part informations.
FAGOR’s monitoring platform, FA-Link machine platform, is being extended with tools focused on ZDM in this pilot and in the related packages of QU4LITY.
There are two IoT platforms included in 2 manufacturaing lines for Automotive and Railway sector for MONDRAGON pilot. IoT platforms monitor 3 grinding machines from railway sector as well as press machine, stacker, Owen and Transfer from Automiotive customer.
The variables monitored allow machine tool buider to know that the process exectuion is under treshold defined as well as enabling predictions about possible faillures. As a consequence there will be an increase of the quality production and the optimisation of the production.
The interoperability layer between two IoT Platfroms has been achieved considering OPC-UA and AAS.
Collaboration with international partners such as ATLANTIS, VTT and FHG has allowed us to include IA algorithms, specific data analitics and data sharing connectors.In spte of the fact that IoT platfrom and interopoerability has been oriented to real time optimisation the analitycs and the IA algorithms have been carryed out off-line
With the quality management platform, optimization of production is enabled.
The optimization of quality process decision is taking place thank to a holistic view of the factors that influence the perception of the quality from the consumer prespective. The platform using a MPFQ driven data model is enabling a faster, more reliable and flexible visualization system and analytical approach.
Solutions, methodologies, and tools that are being developed within different work packages of QU4LITY are being applied to this pilot in the task T7.2 of WP7. As is shown in the figure, different components of the FAGOR platform such as FA-LINK, IKCLOUD+ and IKSEC+ are being extended focusing in ZDM of press machines. FA-LINK platform has been completed with the following components:
The variables monitored in real time throght IoT platfroms for 2 manufacturing lines enables the Zero Defect Manufuactiring goal. Multiple industrial assets monitored force to have an strategic in terms of enchacement processes.
The implementation of modular architecture interconected involving Cloud and Edge Systems, Data Modelling and Learning Service and Iot Hub produce top quality production. The introduction of Interoperability layer for gathering data from two different manufacturing lines together with OPC-UA and AAS is key for the goal.
The ambition is to create a modular monitoring and control system that can be used with many different sensors and process models. The models need to be adaptable to the actual task, for a specific geometry or dedicated material processing conditions. Real-time process and machine signals need to be analysed in by machine-learning algorithms to find structures and pattern related to the required key quality indicators (critical defects per track, distortion, keeping of dimensions).The system will be also connected to a higher-level factory data interface which allows to exchange process information and reassign the production strategy based on additional factory conditions.
In the RiaStone Qu4lity Pilot the ZDM-AQL is implemented in a modular architecture, which includes both in-factory data processing, Edge processing Systems, Cloud processing systems, and Machine Learning processing Services.
The RiaStone Qu4lity Pilot goal is to recognize, detect, and reconfigure the production process parameters as soon as a failure is detected in real-time.
This process is based in the collected data, advanced analytics, machine learning image inspection methods
Process Data from Manufacturing Data Lake is analysed online for suspicious outliers. A Webinterface enables online intervention by staff.
MONDRAGON pilot is being developed considering 2 IoT platfrom and interoperability layer developed by MGEP together with OPC-UA and AAS. Real time process optimisation enables Autonomous quality outcomes and Zero Defect Manufacturing for Automotve (Fagor Arrasate )and railway (Danobat) manufacturing lines. The FA-LINK platfrom monitored industrial assets for Fagor Arrasate and SAVVY IoT platfrom for DANOBAT.
The introduction of IA algorithms by ATLANTIS and VTT are developed offline achieving high top optimisation production. On the other hand, the approach of Machine Learning approach should be further developed. The interaction of the operators, maintenance workers and R&D staff are stil crucial for Top high level Autonomous Manufacturing process Optmisation
Part of the improved decision process enabled by the holistic platrom can be close looped into machine control parametes, allowing an autonomous quality management at factory level
1. Augmented Reality is improving supporting processes Change over, Maintenance and Training. Partner PACE will apply their AR technology to avoid utilization of human resource in Maintenance documents handling. Instead Technologies like smart glasses and Holo lens will be applied. Virtual assistants will guide Maintenances staff through maintenance and repair processes instead. Same is targeted for Training.
2. Visualisation of machine and process data in realtime will enable immediate intervention in case of abnormal behaviour.
The acquired data is used in on-line prediction of defects. The predicted defects are used to adapt the visual quality inspection with an in-hand camera with a robot. The robot is guided to and between predetermined viewpoints associated with the predicted defects. The robot motion is generated autonomously on-line.
Thanks to this new approach with modular adaptable signal processing system and a strong interaction with data space and simulation tools trough the platform, will be possible to detect anomaly and have anequipment condition reporting , reduce reject rate by application of data-driven process model that has been derived by AI algorithms, increase OEE by recommending process adjustments to the operator or directly change the parameters in real time, so to reduce also the operator costs.
The data acquired through computer vision, is processed through machine learning algorithms and compared to an existing database of ~10000+ images already noted by human operators
Inspection results are fed into the synesis-consortium machine control platform that decides necessary changes to the machine parameters driving production in both Business Processes (1&2)
At a certain point of integration, the correlation between overall process parameters and the output product characteristics could be realized in real time in order to adjust, without any Human action, the different parameters along the production line.
This is the ideal towards which we wish to achieve with our future production lines.
As it is described on the Autonomous Smart Factories, in this use case, in addition to the tools that make possible to improve and optimize the manufacturing connected process, it also intends to highly reduce the defective manufacturing increasing the product lifecycle control loop, improving the manufacturing process thanks to the information provided through the product quality control process.
In this use case, GHI and Innovalia will share data in a trust manner through an IDS connector, so that GHI will be able to find correlation between the quality of the parts and the furnace operation parameters.
Through the developments considered in this business case, the machine tool supplier obtains new digitally enabled solutions for the provision of smart services supported on digital platforms.
By the time this sharing data solution has been devise just for the use case, but also a business model in here can emerge as GHI is getting more restrictions with customers that do not want to give the governance of their process data.
Data are valorized thanks to a noevl data model based on MPFQ wich is correlating in a function based structured way components parmeters to process parameters to quality performances
Data are no more stored in silos but they can be used to represent the factors influencing a specifi behavior of process and product performances.
Data are no more stored in silos but they can be used to represent the factors influencing a specifi behavior of process and product performances.
Data architecture is based on a Industrial Ontology derived from MPFQ model
the use o a standard ontology is the basic mechanism to provide a semantic meaning to all the data generated af shopfloor level and enable a urther high degree o correlation with all the other company genarated data.
01-01-2019
-30-06-2023
The material manufacturer stores in the platform the information concerning the production of a specific lot, including production quality control information. The work contractor is informed about the type and amount of material that are shipped to the construction side with estimated time of arrival. If some delays occur, the corresponding application running on ZDMP platform provides an assessment of the delay’s impact on the schedule and suggestions/recommendation for rescheduling.
The test check stations along the assembly line equipped with the cameras serving the goal of optical quality control. Data in the form of images taken within these check stations is a valuable resource that is used not only to check the quality of product, but also to improve the efficiency of quality testing programs. The images taken allow detecting, for instance, defects related to the shape of the product.
Usually the assembling of electronic components within the CONT is performed using 6-11 working stations. AS the workstations can be from different manufacturers and have no direct connection, the goal of ZDMP platform is to provide a needed middleware and services for centralized assembly line control by acquiring data from different workstations.
The X-Ray machine will be deployed at the CONT factory for quality analysis improvement and in-time defects detection. The analysis will be applied to materials and components used within the production process. Before the process start, machine requests the inspection program from ZDMP platform, if one is available, the process starts automatically.
To be able to make prediction and automated quality assessment, process data need to be gathered and presented in the form suitable for processing. Process data are gathered from various sensors and smart meters, as well as from PLCs at MRHS and automatically uploaded to the database. As the production cycle takes around 2 minutes, subsequently data are uploaded every 2 minutes. The ultimate goal is to receive the anomaly warnings close to real-time.
The machine centres operating within the plant are equipped with sensors (e.g. controlling vibrations, power consumption, etc.) supplying the process data. On the other hand, industrial computers controlling the machine also provide additional information about production process, such as process times, machine status and cylinder block type in production. All these data are captured and stored within the database to be further analysed on abnormalities and to provide recommendations on changing of certain parameters to recover production process.
The sensors deployed on the FORM side are used to aquire the process and the equipment data. These data are sent and stored on the ZDMP platform that is used to detect the abnormalities and failures right after they occur and immediately inform the operator, but also to be able to predict and avoid further malfunctions. The components of the ZDMP platform are used to detect any deviations from the normal production process.
The parameters of each manufacturing operation are reported to the ZDMP platform. Within ZDMP platform the parameters are analysed to identify, if selected parameters will result in the good quality and if not, how the parameters can be changed.
he collision avoidance software relies on the 3D models acquired by scanning of the working area. However, before the 3D model can be built the scanning results, also called “cloud of points”, are cleaned and processed.
The quality assurance process will be supported by the ZDMP services for steel width detection, tube shape and horizontal and vertical weld of the steel sheet quality control.
ZDMP platform has the goal to improve and automate the quality check on every stage of the stone slabs and tiles production. Reduce, where possible, the human involvement in the quality check to minimum, e.g. control of the wearing out of the cutting blades. Both the data about equipment performance, as well as material scanning data are utilized. Moreover, CEI machines also provide the data from cameras and projectors used to optimize the cutting process and save material.
In the case of the negative automatic test, operator performs the manual check of the product comparing it with the reference images. The operator decisions with corresponding images are collected and stored to learn or extract the defects types and acceptance limits.
The assembly process is mostly automated. However, some manufacturing stages, as well as some quality operations are performed manually. In this regard, the production process can be improved when quality and performance details can be delivered in time and to the right person.
Each user will have different levels of interaction with the ZDMP platform. Both contractor and supervisor should have access to the construction schedule, but their own task schedules should only be accessible to each of them. Similarly, the Supplier will not have access to the Supervisor or Works Contractor’s areas and vice-versa.
After the inspection process finished, a report is produced and if the product or material corresponds to the specifications the production process continues, but if some deviations are detected, report is sent to the operator for detailed check.
In some cases, FORD production engineer has to contact machine builder to get the recommendations on improving the machining process, while sending the process data to the equipment manufacturer. On the EXTE side the data undergo further analysis to provide recommendation on production process improvement. The recommended actions are manually introduced into the ZDMP platform. Afterward, the platform can assess the effectiveness of provided recommendations and improve its knowledge base.
The operator is involved in the working area scanning process. Afterwards the scanning results can be automatically sent to the ZDMP platform to be further processed and converted into the .stl format.
Through utilization of ZDMP platform, the operator will get a notification, if a defect is detected. This releases the quality operator from their cursory monitoring task, and it is moved into a reactive role. Before, the operator was in charge for manual detection of possible defects. In its turn, ZDMP platform has the goal to reduce the load on operator and make the production process and quality control more self-reliant.
One of the goals of the use-case is to minimize the human involvement in the quality assessment process. However, it is not always feasible, as for instance to detect natural defects of material (stone), but still operator can get significant assistance from ZDMP platform and corresponding services to automatically detect some defects.
In the case of the negative automatic test, operator performs the manual check of the product comparing it with the reference images. The operator decisions with corresponding images are collected and stored to learn or extract the defects types and acceptance limits.
The ZDMP platform targets more the assembly line layer, than separate workstations. The idea is to aggregate the information coming from the workstations along the assembly line and provide the quality control and performance services.
Coordination of the activities within the construction plays a crucial role. Delays in materials shipping and materials quality issues may significantly affect the construction process. However, not all delays have the same impact. ZDMP platform provides the necessary assistance for delays’ impact assessment and enables agile information exchange among involved partners.
The quality control is important stage of every production process, as a defected part can significantly affect the product functionality. To be able to find possible defects at the earliest possible stage and minimizing the effect on the whole production process at the factory scale the X-Ray inspection machine in conjunction with ZDMP platform are utilized.
The assistance in quality control that is offered by ZDMP platform through the timely warning allows reduction of the amount of waste and increase in the number of quality products per meter of steel sheet.
Reduction of the scrap output of the production process, as well as automation of control check operations has significant impact on the quality of the products and leads to a more efficient use of resources.
The operation of machining equipment installed in production line can be optimised and improved through analysis of the process data acquired from the equipment. In some cases the optimisation process can be done by the platform. However, some cases might require involvement of engineers from equipment manufacturer to analyse data and provide recommendations on optimisation. The effectiveness of recommendations can be further assessed by the platform.
If the machine suffers major or unexpected failure, the machine is likely to be stopped. However, some other problems, such as components wearing, can lead to significant degradation in performance. In this regard, an early diagnosis of the defects and early detection of degradation signs reduces production process time. Moreover, introduction of preventive measures, in terms, for instance, of parameter adjustment, allows quality improvement and reduction of defected parts.
Besides the anomalies caused, for instance, by equipment degradation, this use-case targets the human error called collision. Some common collisions identified by the industrial partners are: movement of the milling head crashing into workpiece or machine itself or the CAD/CAM model defines paths involving movements that cause a crash. Collision avoidance is critical for machine damage prevention, as well as product quality maintenance.
Machinery provided by PTM will be updated with ZDMP tools for assistance of the manufacturing process.
In order to indetify the wearing out of the cutting blades, the machine is equipped with additional sensor that can detect any deviations from the normal functioning.
The ZDMP platform provides an optimisation services for the quality check performed within the CONT assembly line, resulting in the reduction of false-positives during the automatic test, as well as creating the models based on operator decisions used for generation of acceptance patterns.
In this use-case ZDMP platform provides a middleware between the workstations and the database keeping the production process details. Moreover, it provides a set of services for the production process improvement.
ZDMP platform allows automated exchange of the critical information that can affect the schedule. Ability to adjust the activities regarding potential delays has significant impact on the construction consortia performance.
The ZDMP platform assists the process of quality inspection, while providing a library inspection programs for specific materials/components. Moreover, to understand the tendency over time current measurements can be compared with historical ones.
The process data required for anomaly detection and production process optimization are gathered from multiply sources both in MRHS and in FORD and aggregated to predict the quality of the product and a rejection probability. Based on the data gathered, the model for parameters’ optimization is generated to achieve a certain, user-defined, objective.
The ZDMP platform offers for both industrial partners an opportunity to improve the communication, through knowledge generation from the raw data. The platform also offers a service for the equipment optimisation to improve the production process.
The ZDMP platform which is deployed outside of the FORM facility, allows for FORM to reduce the maintenance and investment costs for an internal platform that is important for SME. Moreover, ZDMP platform, as data and knowledge aggregator can be utilized by all industrial partners in order to optimise the production process.
The ZDMP platform which is deployed outside of FORM, allows for FORM to simplify the process for data acquisition and processing enabling quick and effortless way of anti-collision system utilization.
In this use-case significant impact is made by the tools provided by ZDMP platform addressing the automation of the quality control process reducing the load on operators.
Utilization of ZDMP platform with corresponding services allows optimization of production process in terms of automation of production and natural defects and better use material through spatial mould optimization.
The suppliers of material to the construction side should be able to timely deliver the data about the quality of materials and, if needed, provide a replacement avoiding significant delays. Even, if the quality of materials is according to specification, accidents leading to material defects can happen during the shipment or on the construction side. Thus, it is important to constantly track the situation to react on the changing circumstances. For the construction company, on the other, hand, is important to align the material shipments to keep up with the schedule.
Sse-cases offer an additional services for quality assessment and prediction based on the aggregated data from the participating industrial partners (Martinrea Honsel (MRHS) and FORD) that will be provided by the ZDMP platform. In this case, the service covers only specific product lifecycle stage, when the product – aluminium cylinder blocks, is produced and arrives at FORD to be used in engine production, as the defected blocks are filtered both at MRHS and FORD. Thus, the goal is to reduce the amount of defected parts through collaboration between two industrial partners.
During the production process, various deviations from the normal functioning of the machining equipment can arise in the given use-case. It is important that ETXE equipment manufacturer could provide a service addressing the whole life cycle of the product (machining equipment) supported by ZDMP platform. The service has the aim of keeping the high efficiency of the machines through detection of abnormalities and quick recovery to the efficient state.
The quality assessment of the products is performed by the FORM industrial partner that utilizes equipment delivered by FIDIA. Degradation in the equipment performance can cause significant quality drop on the FORM side. In order to avoid this, ZDMP platform aggregates the process and equipment data and performs analysis to identify the defects occurring, as well as to detect possible equipment degradation. Analysis of equipment degradation is preformed in cooperation with equipment suppliers.
In order to enable the required automation level for the quality check of the manufacturing process, the necessary equipment will be updated with the ZDMP tools and corresponding services.
This use-case offers additional update to the stone cutting machine through the cutting blades quality control, identifying wearing out. Moreover, the CEI machines allow users to customize the shape and form of products through different moulds and ZDMP provides support for more efficient material usage through more efficient projection of the moulds.
The utilization of ZDMP services by machinery that is used in the steel tubes production lines allows improving the quality check process and improving the product capabilities (machinery).
ZDMP platform makes use of variety of data acquired about machines operation and quality of material. In this way, it is possible to improve the efficiency of production process and reduce the scrap output that can be caused by degradation of equipment parts
The material manufacturer stores in the platform the information concerning the production of a specific lot. This information is automatically generated by the ZDMP platform applications or updated manually. The volume of data is considerable and, for construction materials, needs to be stored for the certain period of time defined by the legal prescriptions.
In UC 1.1 / UC 1.2 use-cases, both industrial partners exchange the data from the various end devices (sensors) in order to achieve the cumulative effect in terms of defects reduction. Thus, the MRHS – supplier of aluminium cylinder blocks, can benefit from the data sharing between the MRHS and FORD to improve the quality of products needed for the engines assembly.
In this case, the FORM industrial partner gets support from the ZDMP platform and the FIDIA equipment manufacturer. Thus, ZDMP platform provides FORM with the analytical tools for defects detection and prediction/prevention. On the other hand, FIDIA comes into play when non-trivial problems related to equipment behaviour occur.
The service proposed doesn’t require big hardware installation, but rather makes use of the data gathered from already installed field level devices (sensors, smart meters, cameras) having the supportive or supplementary role in the production process. However, the added value is in reduction of the number of defected parts or products through extensive utilization of the data-rich environment.
The data generated within the FORD facility are shared with the equipment supplier ETXE with assistance of the ZDMP platform. The local instance of the ZDMP platform is hosted on the FORD side ensuring data protection and confidentiality, while the communication with ETXE is granted. The raw data, as well as aggregated knowledge by ZDMP platform are shared with ETXE for to introduce the recommendations on production process optimization.
The ZDMP platform acquires the process and equipment data from FORM and provides a set of innovative services, namely: (i) parameter adjustment, (ii) operator alerting in case of defect, (iii) correlation among various parameters related to equipment and parameters selected. In the case, when equipment manufacturers need to be involved in the problem solving, data can be securely shared through ZDMP platform.
This use-case only includes only 3 industrial partners. However, the model is scalable and can be applied, to the case with more partners, for instance, the material suppliers. Moreover, different access levels and roles allow effectively regulate type and amount of information one or another partner can get access to.
This use-case has the goal to optimize the quality check process within the CONT assembly line. Data that are not utilized by the previous quality check process are used by ZDMP platform services to complement the process.
In this use-case, besides the services providing performance check and quality control, ZDMP platform also enables communication of the workstations and the database keeping the relevant data.
This use-case targets not only the quality assessment process within the CONT plant, but also can be used by the supply partners delivering material and components for the CONT, as the reports/feedback can be also shared with them.
For the quality assessment and prediction service is crucial to aggregate the data from both the Martinrea Honsel (MRHS) and FORD industrial partners. The quality forecasting or prediction allows optimising and adjusting the production process to achieve better quality of the product – aluminium cylinder blocks, which is not possible or less accurate without digitalized data exchange between industrial partners.
In this use-case the main data supplier is the FORD manufacturing facility. The other industrial partner provides the services around the life cycle of the product (machining equipment) deployed within the FORD facility. These services are only possible under the extensive data exchange process between industrial partners (assistance from ZDMP platform), so that the ETXE – equipment manufacturer/supplier, can assist in terms of maintaining the quality of equipment operation.
The main data supplier is the FORM industrial partner. After the data are gathered, they are sent and stored within the ZDMP platform deployed outside of FORM. The data are critical to feed ZDMP platform providing the quality control services. Additionally, data can be shared with FIDIA equipment manufacturer to assist with equipment-related quality problems.
The tools provided by ZDMP are integrated with the steel tube machines automating some critical quality check tasks, while improving the overall quality control process.
ZDMP platform assists the internal quality check system. The quality check stations along the assembly line provide the images for optical quality control. These data along with quality test results are accumulated and analysed by ZDMP platform, and the feedback is generated.
All workstations are connected to the driver layer allowing equipment to communicate with server line layer. The data extracted from the equipment are stored, used by services and made ready for visualization.
The usage of ZDMP platform in conjunction with the X-Ray machine allows to automate the quality check process and to improve the inspection scope (as before only few items from each lot of materials/components are checked on compliance with specification due to time constraints). The new approach allows extending the number of inspected parts, only requiring operator involvement, when the deviations from specifications are detected.
The stages of production process are tightly interconnected. If ZDMP platform detects the wearing out of the cutting blades, the production process has to be stopped not to possibly waste the material. Or, if some natural defect of material is being detected, it can be still possible to use the material through adjustment of the moulds and avoid the defected part.
The reports or feedback generated as result of the quality inspection is shared with material/component suppliers. Based on these reports further actions towards quality improvement can be undertaken.
ZDMP platform supports the industrial partners by collecting the process data from MRHS and FORD and providing reasoning to be able to detect and predict anomalies and provide some basic recommendation on improvement of the manufacturing process on the MRHS side. Both companies make use from this service, as they are long-term value-chain partners and interested in the costs and scrap output reduction resulting in the improved manufacturing process.
ZDMP platform intends to provide a secure and confident environment, where the industrial partners can exchange their data. The cylinder block manufacturer (FORD) provides the process data to the equipment supplier ETXE, the last, in its turn, provides recommendations on optimization of the production process (e.g. adjustment of parameters, etc.). Moreover, ZDMP platform aims at performing some reasoning actions to simplify the data exchange between the industrial partners.
ZDMP platform quality control services allows for FORM to timely react on the deviations within the manufacturing process. Depending on the data acquisition frequency and number of machine components the data size can reach up to 10MB per production hour. The recommendations generated by ZDMP platform can be utilized for actions planning towards quality improvement.
The material suppliers provide the product quality data, as well as data about material types and amount to be delivered. Thus, it is possible for construction to react in agile way and reschedule in the case of unexpected accidents.
It is important, not only for the construction company, but also for the material suppliers to track the amount of shipped materials and quality, and, if needed, coordinate and adjust activities.
ZDMP platform, acquiring data from FORM, provides predictive services related to, for instance, equipment degradation dynamics (especially moving parts of the machine) to be able to timely react and replace or fix the corresponding part.
01-01-2019
-31-12-2022
01-10-2018
-31-03-2021
01-09-2017
-29-02-2020
01-10-2017
-31-03-2021
01-05-2015
-31-07-2018
01-06-2017
-31-05-2020
01-10-2017
-30-09-2020
01-10-2017
-31-03-2021
Z-Bre4k will provide a complete monitoring solution at component, machine and system level by combining the high capabilities and effectiveness in sensors and actuation, networking and computational power, utilisation of better and smarter technologies (e.g. material and tools). The latest technologies and algorithms will be utilized for adaptive systems while surpassing the fact that they are disjointed, overwhelmed by complexity, vulnerable to external influence and poor Predictive Capabilities.
A real-time adaptive simulator with high fidelity will be a demonstrator (remote or local) of the machine’s state, in which a fast-forward simulation mechanism (prognostic models) predicts the potential events of breakdown of components and machines. What-if capabilities will allow the maintenance planners to find the most effective and cost-efficient schedules for component replacement and maintenance plans.
Strategies to improve maintainability and increase operating life of production will be applied to update the existing and to develop a set of new strategies based on real data in order to improve maintainability and operating life of production systems. This approach will use a method to translate optimization objectives defined at production and factory levels, into optimized maintenance policies at asset/production process levels.
At the asset and machine level, the Z-BR3AK solution will perform a condition monitoring and generate health status reports. Attention will be given to the faults detection through FMEA analysis (FMECA) to allow remedial actions and synchronise the manufacturing process. The proposed engine will perform monitoring, inspection and control at component, machine, system and product level to issue warnings, alerts (e.g. about deviations from production and quality requirements), reports on (potential) failures or failure prone situations and pass related information to a higher-level Z-Bre4k DSS (for decision support at manufacturing and enterprise level).
01-10-2017
-30-09-2021
01-10-2017
-30-09-2020
01-09-2017
-30-11-2022
01-10-2018
-31-03-2022
ROSSINI provides several advances beyond the state of the art, developing a Safety Aware Control Architecture for robot cognitive perception and optimal task planning and execution.
In order to enable actual perception, ROSSINI leverages on a data processing technique for real-time image recognition, to obtain a semantic scene map that adapts to dynamic working conditions.
ROSSINI adopts also algorithms for motion prediction of humans and moving entities, and embeds their stochastic information in the dynamic semantic scene map. This allows the robot to further refine its planning in order to maximize performance while preserving safety.
In this way, ROSSINI introduces a novel perception and control architecture blending safety and performance oriented planning/control that wants to reach the goal of optimising the trade-off between human operator safety and manufacturing productivity.
The ROSSINI platform implementation of a Safety Aware Control Architecture makes it possible for robots to optimally schedule the tasks reacting to a changing environment. in fact, each action to be execute is sent to a dynamic planner that dynamically optimizes its execution in terms of trajectory to follow and/or interactive behaviour to reproduce while considering the variable safety conditions in the working area.
01-09-2018
-31-08-2022
01-10-2018
-31-03-2022